ANLEON PM200 Personal Monitor Station Multi-Channel Mixer stage monitor

The PM200 is a personal monitoring device with a 1/4" TRS stereo/mono Line Input,a single XLR Microphone input and hard-wired XLR pass-through, and a 1/4" stereo/mono Instrument input with two transformer-balanced and isolated XLR Outputs. All three of these inputs are also routed via individual Level controls, to a 1/4" and an 1/8" (3.5mm) Phone Output. The Mic Through, and Instument outputs have Ground Lifts for elimination of ground hum. The PM200 is ideal for live bands and church musicians, as well as studio musicians and singers. Having the ability to monitor a main mix along with the musician's voice and their instrument make the PM200 an effective and versatile tool. Specifications: Max Input Level: -20dB XLR, +40 dB line, +15dB Instrument Inst. Input Impedance: 50 kOhms Inst. Output Freq. Response: 10 Hz - 30 kHz ±3dB Output Impedance, Headphone: 10 Ohms Output Impedance, Instrument: 2 ea.; 100 ohms balanced Gain: 20 dB 1/4", 50 dB XLR Headphone Frequency Response: 20 Hz - 20 kHz S/N Ratio: 90 dB PM200 *1 110V US Power supply adapterNOTE: If the Mono/Stereo switch is missing, only one side of the headphones/earphones will work.

• LINE INPUT: 1/4" TRS stereo jack for connection to a line level source such as a mixer monitor/auxiliary output, cassette player output, CD player output etc. ( If this plug is Tip-Ring-Sleeve stereo and you're sending a stereo signal to this jack, select the STEREO setting of the Mono/Stereo switch. If the plug is Tip-Sleeve mono, select the MONO setting of the Mono/Stereo switch.)
• MIC INPUT: XLR balanced jack for connection to a condenser or dynamic microphone. (If you are using a condenser type mic, you will need to power it via phantom power from the mixer which connects to the MIC THRU jack. This jack will pass the phantom power from a mixer on to the microphone)
• INSTRUMENT INPUT:1/4" TRS stereo jack for connection to an instrument or line level signal such as a guitar processor,keyboard, or instrument preamp output, any stereo or mono instrument level signal.